Controls per Amplifier
AC Status Remote Power On/Standby
Automatic Detection of Bridge Mode Automatic Detection of
connected Amps Power On Delay 0 to 10 sec
Controls per Channel
Input On/Off Input Polarity Input
Sensitivity Mute On/Off Paging On/Off Monitor Outputs A
& B On/Off Monitor Polarity Monitor Level +6 dB to -90
dB (0.5 dB) Gain + 6 dB to 90 dB (0.5 dB increments)
Monitoring per Channel
Output Clip Protect Status Input Level
Temperature Output Voltage Output Current Output
Power Headroom Load (Short/open) Ground Short (100 V)
Special Functions
16 Presets in a Non-Volatile Memory Presets
may be Recalled via Logic Inputs Versatile Errormatrix LCD
for all Functions Keys for the Control of all Parameters
Diagnosis LED
Communication
Ethernet 10Base-T (10 Mbit / RJ45) TCP/IP
based Protocol Dataport 15 pin Sub-D female RS232 Port for
Service & Diagnosis
Inputs
4 Logical Inputs 5-24 Volts (High) Paging,
electr. balanced Monitor, electr. balanced Nominal Level + 4
dBu Max. Input Level + 20 dBu All Connectors
Euro-Phoenix
Outputs
4 Relay (DPST), 20 A / 250 V each Monitor,
electr. balanced Nominal Level + 4 dBu All Connectors
Euro-Phoenix
LEDs
Link per Channel RX, TX for all channels
General
Weight: 4 kg (9 lbs) Dimensions:
1 RU / 19" 483 x 335 x 44 mm
More technical data you will find in the documents
listed below.
|